.png?x-oss-process=image/resize,h_3000,m_lfit/format,webp)
For oilseed processors in 2026, the 10TPH peanut oil milling project represents a high-return investment. Since peanuts possess a high oil content of 45%–55%, achieving a balance between oil aroma and maximum yield is essential. Our complete design and commissioning ensures that your facility meets international standards while maintaining a competitive investment cost for 10TPH peanut oil production line.
The success of a turnkey peanut oil extraction plant design and layout starts with an optimized pre-treatment section. Unlike palm oil, high-quality peanut oil requires specialized Cleaning & Dehulling to protect the pure oil color. Our 10TPH layouts feature adjustable Roasting (90–150°C), which is critical for inducing the Maillard reaction that creates the signature nut aroma. The integration of pre-pressing and solvent extraction ensures maximum efficiency.
.png)
When calculating the investment cost for 10TPH peanut oil production line, utility management is key. Based on our technical benchmarks, a high-efficiency plant follows these metrics to ensure rapid ROI:
| Technical Indicator | Standard Value | ROI Impact |
|---|---|---|
| Steam Pressure | 0.35 MPa | Reduces refining loss |
| Solvent Recovery | ≥ 99.5% | Lowers daily OpEx |
| Residual Oil in Meal | ≤ 0.8% | Maximizes oil outturn |
Seamless peanut oil mill machinery installation and commissioning services are vital for safety and performance. During commissioning, we fine-tune the Physical Refining towers (operating at 220-260°C under high vacuum) to ensure your finished oil has an FFA < 5% and moisture ≤ 0.2%. Our training programs ensure your staff can manage the DTDC systems safely while keeping solvent loss at ≤ 1.5 kg/t.
With our "Pre-pressing + Solvent Extraction" combo, the residual oil in the meal is reduced to ≤ 0.8%, which is far superior to single-pressing methods.
We use a negative pressure evaporation system. This ensures solvent consumption stays ≤ 1.5 kg/t with a recovery rate of ≥ 99.5%.
Physical refining at 220-260°C preserves the natural peanut aroma, eliminates chemical soapstock waste, and reduces refining loss by 10-15%.
Our design targets steam consumption at ≤ 600 kg/t (0.35 MPa) and electricity at ≤ 25 kWh/t of raw material.
Commissioning usually takes 4-6 weeks to ensure the oil reaches FFA < 5% and the meal meets safety standards for residual solvent.
Get a customized plant layout and a detailed investment cost breakdown from our experts.
Get a Free Technical Quote
